Hi,
for iMac 8.1 model A1224 with defect ODD.
Is it really necessary to remove the logic board in order to replace the Optical Disk Drive, please?
Or can i just replace that peace right away after removing the display.
Thanks in advance,
Kind regards,
Donat Merlevede
Powerbook Medic
10
years ago
@Joe - we do not, unfortunately. it is fairly tricky so we just sell the stand still attached to the rear housing.
Joe
10
years ago
Do you all have instructions that detail removal of the stand? In other models, there appears to be a latch button that you use a plastic card to remove, but I can not feel the latch in the 20" model. Thanks!
Powerbook Medic
10
years ago
@Jose - it might be best to take it somewhere to be diagnosed. It'd be a headache to figure it out testing one part at a time.
Jose Carrillo
10
years ago
Hi guys !!
Please help.. My iMac A1224 EMC2133
has stop working
Now it shows black screen
I open it up And 3 out of 4 leds light up wit solid green
(The first three) (4th is off all the time)
When i turn it on i can hear chime And fan works
Also, it fail to pass the external LCD test
All LCD cable connections are connected
I dont have ALL PARTS to test it out
Please help me isolate the hardware failure
thank you very much
Carlos H
10
years ago
Superb ! This technician is máster class.
Very, very helpful.
Congratulations !
naru
11
years ago
supper guru
Paul
11
years ago
GREAT video! Very helpful to me in replacing my power supply. 10 STARS!!!
Comments
Donat Merlevede
Powerbook Medic
Joe
Powerbook Medic
Jose Carrillo
Carlos H
naru
Paul