Mac Repair Guides for Apple Macbook, iPad, Powerbook iPhone & iPod

Comments

Ipad Finatic 7 years ago	Ipad Wifi is causing FEC errors on ATT Uverse Modem when accessing any internet activity. Mostly the Ipad is used for youtube, email and sometimes facetime. What is the most likely cause of the FEC errors? Wifi logic board maybe?
Jono 10 years ago	Thank you for your time. Thought I was going mad there.
Powerbook Medic 10 years ago	@Jono - Ah it does look like the Kindle app requires iOS 7.0 which is not supported by the first gen iPads. An iPad 2 is required.
Jono 10 years ago	The Kindle app does not show up in the app store. There is a kindle app for magazines not books.
Powerbook Medic 10 years ago	@Jono - there is a kindle app on the appstore.
Jono 10 years ago	Is there any way to load the Kindle app for reading books?
abdi ahmed 10 years ago	my iPad model A 1219 iPad is disabled ihave use apply power button and volume down never start what shall i do to restart my tab iPad
pilson 10 years ago	My apple ipad 2, it isn't coming on anymore, I don't know whether its the battery or something else please could yourll help me out
Powerbook Medic 10 years ago	@Amat - you most likely need a new speaker. We sell it in the parts list to the right.
Amat 10 years ago	My iPad have no sound..
Amat 10 years ago	My iPad have no sound..
Raul Garcia 10 years ago	Saludos a todos De verdad que este video si es de gran ayuda para mi ademas de que si explica sin confuciones Thank U so much
Powerbook Medic 10 years ago	@vc - you can restore it from within the settings, general menu if you can get that far. otherwise, you can restore it after syncing it up to iTunes.
vc 10 years ago	My Ipad model: A1219 restarts every time I turn it on and select an app. I don't know what to do. please help. I only had it for a month when it started doing this. how can I reset it to factory settings if its doing that?
David Henry 11 years ago	I've done the screen replacement and it looks good - the problem is that if any camera app is started, the iPad reboots. Does anyone have any ideas?
Carol Myers 11 years ago	My problem is I put the SIM card in wrong and can't get it out. I didn't use the little bracket that was in the slot originally. Is there a tool I could purchase or do I need to take the ipad apart.
rowel 11 years ago	my ipad not funtion wil that the prrgrams shoutdown...
David Teo 11 years ago	I broke my screen doing this.
sereva 11 years ago	i have a similar problem with YAZZ. what can I do.
Powerbook Medic 11 years ago	@Mac K - it is just adhesive, so once you have the digitizer connected back, you just stick it back in.
Mac K 11 years ago	How do you put the glass & panel back on? Does it just snap back in? Do you have a re-assembly video?
Powerbook Medic 11 years ago	@dantor - probably a battery issue.
dantor 11 years ago	my ipad doesn`t charge but it`s sync the apps...what is happenin`?
YAZZ 12 years ago	MY IPAD IS DISABLED AND ASKES TO CONNECT TO ITUNES. HOW DO I PROCEED TO ENABLE IT
Powerbook Medic 12 years ago	@bashy - the video will show you how to take it apart up to the screen, then you just put it back together.
bashy 12 years ago	how to replacement the screen i pad
Powerbook Medic 12 years ago	@kk - there should be a way to skip the networking part. I'm not sure on the exact wording.
kk 12 years ago	my ipad configuration steps are not completing.. Language,Country,..etc.. when came to the Network selection its not finding.. at my home i did't have any Wi-Fi.. still its in search mode
Powerbook Medic 12 years ago	@vince - if nothing at all comes on the screen and it doesn't get detected by your computer when you try to sync it up, it is most likely the logic board.
vince 12 years ago	my ipod went blank after using it. no specific reason. can not power it again.what could be the problem? please help
Powerbook Medic 13 years ago	@Alex - the wifi and 3G models are not interchangeable.
Alex 13 years ago	What about changing logic boards from 16gb wifi to 32gb wifi + 3G is that possible assuming other parts are also upgraded such as sim card antennas etc.
francis c.n 13 years ago	well i think you guys are doing really great though i was not able to see the video but i can figure out what you guys can be up to. Keep up the good work hoping to be like you engineers someday. Cheers
Powerbook Medic 13 years ago	@Don - no, but you may need some additional adhesive.
Don 13 years ago	Do you need to replace the pads when replacing the glass and digitizer panel assembly?
Powerbook Medic 14 years ago	@Griffster - no the RAM is built onto the logic board. It is not upgradeable.
Griffster 14 years ago	Excuse me... 16GB to 64GB
Griffster 14 years ago	I did not see where the memory was... Is it possible to upgrade a 16MB version to a 64MB version?
Powerbook Medic 14 years ago	@Mike - great question, no idea. They have disappeared from every source imaginable.
Mike 14 years ago	Hi, when you'll get volume/lock/power button flex at stock?
Powerbook Medic 14 years ago	@Miguel - it is hard to say. it could be a problem with the replacement logic board or some loose connection inside somewhere. You may want to open it up and reseat all the boards and cables or take it somewhere to be professionally diagnosed.
Miguel Lopez 14 years ago	after change a iPad Main Logic Board, i swicth on the ipad and i have the itunes logo , connect itunes and i have this message there is a problem with your ipad. we´re sorry the iPad you connected may be damaged and cannot be activated for service we recommend you visit your neares apple store for more information. what can i do?¿? regards
Powerbook Medic 14 years ago	@sb - I would just go through our service parts listing to the right and see what you are missing.
sb 14 years ago	I have a ipad back case, midboard, glass and digitizer.... what other parts would i need to create a functional ipad thanks
Powerbook Medic 14 years ago	You'll need a heat gun to separate the digitizer from the midboard, but you'll have to be careful as those home buttons are easily susceptible to melting.
Bryan 15 years ago	Have you tried using a heat gun to loosen the adhesive connecting the LCD to the Digitizer?